Silicone Resin as a Coating Adhesive Similar to SILRES MSE 100
Apr 4, 2023
Equivalent of SILRES MSE 100 Silicone Resin
Product Name: Silicone Resin
Item No.: SilibaseSR-6321
As one good replacement product of Silres MSE 100 can be cured at room temperature, has good activity, high hardness, non-sticky in hot state, low loss of light, and heat. Excellent performance such as non-smoke. Mainly used in the production of high-solids heat-resistant coatings, such as automobile, motorcycle and aircraft parts (such as exhaust systems, mufflers, engine parts), household appliances (oven, stove, barbecue), and can also be widely used in automotive protection Hard plated crystal material.
Performance and use
SilibaseSR-6321 silicone resin is a low-molecular-weight, solvent-free silicone resin prepared by the mixed hydrolysis of alkoxysilanes with different functionalities. We normally say that SilibaseSR-6321 silicone resin is the methyl ester of a mixture of different oligomeric methylsilicates. SilibaseSR-6321 silicone resin is a methoxyfunctional methylpolysiloxane.
Applications of SilibaseSR-6321 silicone resin
• Heat-Resistant Coatings
• Industrial Coatings
Typical application of SilibaseSR-6321 silicone resin is the use as binder for coatings with these key properties:
• resistance to high heat
• room temperature cure
• no smoke generation during (first) heating
• high hardness, no thermoplasticity
Technical index
- Project indicators
- Colorless to light yellow transparent liquid
- Viscosity (25℃, mPas) 20-200
- Active ingredients (105℃, 2h), % ≥97%
- Flash point (℃) ≥65
- Alkoxy content, wt% ~30%
Note: These data are for reference only and should not be used as preparation specifications.
Packing and shipping
Packed in 200kg iron drum, stored in a ventilated and dry place, storage period is half a year (exceeded inspection is qualified, it can still be used). Avoid direct sunlight, this product is non-dangerous.
The above text description, suggestions and data are from sincerity and truth. Since the use environment of this product is beyond our control, the user is responsible for testing before using this product to determine whether it meets your requirements and the best dosage.
